I want to customize the diamond ring, but there are some doubts about the inlaid method. Some friends say that the inlaid diamonds will fall off ...
4 thoughts on “Should diamonds inlaid on the K gold ring should choose claws or clamps or half -packets?”
Leave a Comment
You must be logged in to post a comment.
■ Claw inlaid
The long metal claw (column) tightly clasped the diamond. The biggest advantage is that the metal rarely blocks the diamonds, clearly presents the beauty of the diamond, and facilitates the light from different angles and reflects, so Diamonds look bigger and brighter. It is currently becoming a popular single diamond jewelry style in the market. Claw sets can generally be divided into six claws, four -claws, and three -claws. Nowadays, the wedding rings are popular with the six -claw crown. The princess's square diamond can be inlaid with four -claws. Large -grained diamonds are generally used in the form of two small claws and one claw. The claw inlaid requires the same size of the claws, the interval is uniform, and the diamond countertop level is not inclined.
■ Bags inlaid
The waist of the diamond with the metal edge is sealed within the metal (frame), and the diamond is prevented from falling off with the solids of the precious metal. This is the most firm and traditional inlaid method. It shows the light of diamonds, light and restrained, and has a peaceful and dignified temperament. When buying a packet inlaid diamond, carefully observe that the tip of the diamond cannot expose the bracket, otherwise it will damage the skin or hit the diamond.
■ Card inlaid
The waist or waist and waist and bottom tip of the diamond with the tension of the metal is a more trendy style. The nakedness of the diamond is further inlaid than the claws, flashed with glittering glory.
■ Rail inlaid
, also known as clamping and wall inlaid. It is a method that first puts the groove on the precious metal bracket and then clamps the diamond into the groove. The orbital inlaid method is suitable for diamonds of the same caliber. One by one is inlaid in the metal orbit one by one, and the diamonds are used to support the metal on both sides. This inlay method can make the surface of the decoration smooth.
■ Nail inlaid
The edge of the mouth inlaid on the metal material, use a tool to shovel a few small nails to fix the diamond. On the surface, no metal or claws that are fixed with a fixed diamond are actually arranged in the metal mortise. Because there is no metal surround, diamonds can penetrate and reflect more sufficient light, highlighting the gorgeous light of diamond jewelry.
■ Tibetan inlaid
, also known as inlaid, is to inlay diamonds in a thick metal or large area. The pavilion of the diamond will not be exposed. It is a very stable and lasting inlay method. Because this inlaying method does not have claws, it seems smooth and clean, especially suitable for daily wear.
It the inlaid process will not fall off, so don't worry, what kind of inlaying method to see what effect you want
n claws claws claws Mosaic
pack of inlaid diagram
Hello, I made naked diamonds in Beijing. K gold is very hard. Several inlaid methods you said are okay. Essence
But the diamonds will shake after the clip is inlaid for a long time, and it needs to be maintained frequently. The other types of other types are fine.
The main stone is inlaid with claws, and the broken diamonds can be considered inlaid (it should be the clamping or half packet inlaid you said)
It if you like the main stone, you can also use a bag, but the diamond will look much smaller and not flashed enough.
The planned development progress will soon be planned to be a science and technology building