Materials and tools: two Sprite beverage bottles, glue, engraving, scissors.
production method: 1. Take the green base of a sprite beverage bottle, cut it into a lotus -like, and twist down and stick down the bottle body into a base.
2. The green ring of 2 cm wide on the green bottom is still covered on the bottle.
3. Remove the bottleneck, cut a 13 cm long broadband, and a few narrow bands with a wide 3 cm wide.
4. Use the carved knife to engrave the pattern on the 3 cm narrow stripe, then fold these narrow strips outward, and insert it into the green ring from bottom to top.
5. Take another beverage bottle, use the bottle body, and cut 6 pieces of 17 cm long leaf with scissors.
6. Nail the flower basket on the wall, insert the leaves and flowers, and the wall -mounted flower basket.
The shirt handbag tutorial The gifts can be placed in the bag, given to friends or in Father's Day, to Dad, it is also good!
The paper of A4 is used here. rn1、左、右对折，然后展开；rn2、上边向下，折到3cm处；rn3、继续向下折；rn4、翻面；rn5、 The edges on both sides are folded to the midline and then expanded; 6, the tape is pasted on the right side, and the two parts shown in the figure are together; Fold to one -third; 8, fold down the corner of the previous step, and then expand; 9, the "mouth" shown at the white arrows; 10, the previous step The "mouth" that is expanded, fold the upper and lower sides to the middle; 11, stuck with tape; 12, fold in the middle of the sides of the figure, and then expand; 13, pull down down the bottom; pay attention to it; pay attention The border of the blue line is in the position in the figure below; 14, press the crease in the 12 steps, open the bag; 15, fix the strap on the bag; 16, use the book book machine machine Fix the band; 17, the tie (folding method of the tie) can also be glued on the mouth of the bag.
Homemade wall -mounted flower baskets
Materials and tools: two Sprite beverage bottles, glue, engraving, scissors.
production method:
1. Take the green base of a sprite beverage bottle, cut it into a lotus -like, and twist down and stick down the bottle body into a base.
2. The green ring of 2 cm wide on the green bottom is still covered on the bottle.
3. Remove the bottleneck, cut a 13 cm long broadband, and a few narrow bands with a wide 3 cm wide.
4. Use the carved knife to engrave the pattern on the 3 cm narrow stripe, then fold these narrow strips outward, and insert it into the green ring from bottom to top.
5. Take another beverage bottle, use the bottle body, and cut 6 pieces of 17 cm long leaf with scissors.
6. Nail the flower basket on the wall, insert the leaves and flowers, and the wall -mounted flower basket.
The shirt handbag tutorial
The gifts can be placed in the bag, given to friends or in Father's Day, to Dad, it is also good!
The paper of A4 is used here. rn1、左、右对折，然后展开；rn2、上边向下，折到3cm处；rn3、继续向下折；rn4、翻面；rn5、 The edges on both sides are folded to the midline and then expanded;
6, the tape is pasted on the right side, and the two parts shown in the figure are together; Fold to one -third;
8, fold down the corner of the previous step, and then expand;
9, the "mouth" shown at the white arrows;
10, the previous step The "mouth" that is expanded, fold the upper and lower sides to the middle;
11, stuck with tape;
12, fold in the middle of the sides of the figure, and then expand;
13, pull down down the bottom; pay attention to it; pay attention The border of the blue line is in the position in the figure below;
14, press the crease in the 12 steps, open the bag;
15, fix the strap on the bag;
16, use the book book machine machine Fix the band;
17, the tie (folding method of the tie) can also be glued on the mouth of the bag.
You can send a DIY hut, but you need to be patient. The effect is better.
You can use Baidu without weaving tutorials, you don’t have to do not weave. Ordinary cloth can also make some gifts.
DIY a puzzle with some memorable photos!